previous page   back to table of contents   next page

VII. 3-Band Cryo Data Release


2. 3-Band Cryo Data Products

e. Atlas Image Frame Cross-Reference Table

The WISE 3-Band Cryo Release Atlas Image Frame Cross Reference Table provides a listing of all individual Single-exposure image frames that contribute to each Atlas Image in each band. It can be used to determine which frames contribute to a given Atlas Image, or it can be used to determine to which Atlas Images a particular Single-exposure image frame contributes. The criteria used to select and filter the scans, framesets and frames that are used as input for the Multiframe pipeline processing that generates the coadded Atlas Images and extracted Source Working Database are described in VII.4.

i. Table Format Description

The following table contains brief descriptions of the parameters provided for each record the WISE 3-Band Cryo Release Atlas Image Frame Cross Reference Table.

The columns in the following table are:

Column NameFormatUnitsnullsDescription 
coadd_id%20s----no Atlas Tile identifier from which source was extracted. The identifier has the general form: RRRRsDDd_[trev], where
  • RRRR = Tile center RA in deci-degrees, truncated not rounded (e.g. RRRR=int[10*ra]).
  • s = Tile center Declination sign ("p"="+", "m"="-")
  • DDD = Tile center Declination in deci-degrees. For positive declinations, the tenths of a degree is truncated not rounded (e.g. DDD=int[10*dec]). For negative declinations, the tenths of a degree is always truncated leftward on the number line (e.g. DDD=ceil[10*abs(dec)].
  • [trev] = Disambiguation string.
    • t - Tile type ("a" = Atlas)
    • r - Data Release ("b" = All-Sky, 3-Band)
    • e - Survey phase ("4" = All-Sky, "3" - 3-Band)
    • v - Processing version.

    The disambiguation string is always ab31 for Tiles in the WISE 3-Band Cryo Data Release products.

For example, the identifier of the Atlas Tile with center at (α,δ = 69.23109,+40.89000) is 0692p408_ab31.

 
band%1d ---- noWISE band number. 1=W1, 2=W2, 3=W3.  
scan_id%6s----no Scan identifier. This is a six character string that identifies a block of survey exposures that are acquired between two flight system maneuvers, such as reorientation of the instrument boresite near the ecliptic poles, or slews to acquire TDRSS for data downlink contacts. Because maneuvers often take place near the ecliptic poles, the scan number is roughly associated with a half-orbit's worth of images. However, scans can cover less or more than half of the arc between ecliptic poles.

The scan_id has the general form SSSSSx, where

  • SSSSS is a zero-filled, five-digit integer that is twice the WISE orbit number. The orbit number increments each time the flight system passes the north ecliptic pole (NEP). Orbit number 1 was defined to start with the fictitious NEP passage immediately prior to WISE launch.
  • x   is a letter assigned based on sequential count of scans started in a specific half-orbit. The first scan has x="a", the next x="b", up to a maximum of x="c" for scans in the 3-Band Cryo Release.

The first scan whose data are used in the 3-Band Cryo Data Release is scan 07101b. This was the second scan after the SEP crossing in the 3550th WISE orbit. The final scan included in the Release is 08744s, the first scan after the NEP crossing in the 4372nd WISE orbit.

 
frame_num%3d----no Number of the frameset on which this source was extracted. The identifier has the general form MMM, a zero-filled three-digit number.

The frameset number is computed based on time bins which count from the scan start time:

fr_num = int[(((frame_utc - dt_beg) - scan_start_utc)/bin_size] + 1

where

  • int[] means truncate to an integer
  • frame_utc is the nominal frame exposure center UTC (when the boresite crosses the image center) in seconds
  • dt_beg is 4.4s. This is a nominal offset to approximate when the exposure began
  • scan_start_utc is the scan start time in seconds
  • bin_size is 10s.

For example, a frame with a start time 1234 secs after the scan start time would have a frame number of 124.

N.B.

  • Frame_num is not a frameset sequence number
  • As a result of using a 10 sec bin, every 11th frame skips a number, so it is normal to see breaks in the frame numbering and it doesn't indicate missing data.
  • Because frameset numbering is based on the predicted scan start time from the survey plan, and because frameset data may not start being acquired until well after the start of the scan, frameset numbers often do not start at 1 for a scan.
 
load_id%3d----no This is an internal archive accounting number that tracks in what batch of data the information in this record were loaded into the database.  
cntr%10d----no Unique identification number for the Atlas Image Frame Cross Reference table entry created sequentially in the order of the Archive load processing.  


Last Updated: 2012 July 26


previous page   back to table of contents   next page